DTF Transfers by Size
Please adhere to the following steps for submitting your transfer order:
1. Choose the desired size for your transfer.
2. Indicate the quantity you require.
3. Upload your artwork directly through our portal.
4. Add your selection to the shopping cart.
Important Note: We are pleased to announce that all transfers are now produced using our innovativeĀ cold peel film technology. This enhancement ensures a straightforward press-and-peel application process, enhancing the quality and ease of use of our products.
1. Press your blank apparel on the side you will have your
design, to give it a nice smooth surface.
2. Place your DTF Transfer in the exact location you want.
3. Cover your DTF Transfer with teflon on or parchment paper of the same size or larger. This will help avoid your transfer from
lifting.
4. Use your preheated Heat Press at 300-325 degrees to press down with heavy pressure for 20-25 seconds.
5. Once cooled down about 2-5 mins depending on room temperature, peel off the backing of your DTF transfer.
6. Do a final press of 7-10 seconds using teflon or parchment paper
Using an iron:
1. Set your iron to the highest cotton setting without steam.
2. Preheat your garment for a few seconds to remove any moisture and wrinkles.
3. Place the transfer face down on the garment, making sure it's centered and aligned.
4. Apply firm and even pressure while moving the iron in a circular motion for
about 20-30 seconds.
5. Allow the transfer to cool down completely before peeling off the backing paper.
6.Ā Do a final press of 7-10 seconds using teflon or parchment paper
