DTF Gang Sheets
Please follow these instructions for submitting your print-ready gang sheet:
1. Ensure your artwork is prepared in a high-resolution format (300 DPI) and saved as a transparent PNG file. Do not mirror the images.
2. All gang sheets are now produced using our advanced hot peel film, allowing for an effortless press-and-peel process.
Submission Process:
a. Choose the desired size for your gang sheet.
b. Specify the quantity you wish to order.
c. Upload your pre-designed artwork directly to our platform.
d. Proceed to add your selection to the cart.
Assistance Available: Should you require any assistance or have inquiries, please feel free to reach out to us.
Note: In the event you upload a single design instead of a gang sheet, kindly inform us of the specific size and quantity you intend for the gang sheet.
1. Press your blank apparel on the side you will have your
design, to give it a nice smooth surface.
2. Place your DTF Transfer in the exact location you want.
3. Cover your DTF Transfer with teflon on or parchment paper of the same size or larger. This will help avoid your transfer from
lifting.
4. Use your preheated Heat Press at 300-325 degrees to press down with heavy pressure for 20-25 seconds.
5. Once cooled down about 2-5 mins depending on room temperature, peel off the backing of your DTF transfer.
6. Do a final press of 7-10 seconds using teflon or parchment paper
Using an iron:
1. Set your iron to the highest cotton setting without steam.
2. Preheat your garment for a few seconds to remove any moisture and wrinkles.
3. Place the transfer face down on the garment, making sure it's centered and aligned.
4. Apply firm and even pressure while moving the iron in a circular motion for
about 20-30 seconds.
5. Allow the transfer to cool down completely before peeling off the backing paper.
6. Do a final press of 7-10 seconds using teflon or parchment paper
